Why homeowners choose IQ Installs
Our estimating software produces a fully itemized price during the in-home consultation, so you see every line before you decide.
We check the subfloor before we quote and level only the areas that need it, instead of charging for the whole floor.
Installed by IQ vetted and trained crews, with job-site clean-up, debris haul-away and a final walkthrough with you.
Every installation is backed by our 3-year workmanship guarantee. IQ Installs is licensed and insured.
IQ Installs installs engineered hardwood across north Metro Atlanta. Engineered hardwood is a real-wood veneer bonded over a stable core, so it resists humidity and can be floated or glued directly over a concrete slab. We install it three ways: floating, glue-down or nail-down.
What engineered hardwood is
Engineered hardwood is a real-wood veneer bonded over a stable plywood or HDF core. The core keeps the board from moving as much as solid wood does with Georgia's humidity, which is why engineered hardwood can go places solid hardwood cannot, like a concrete slab or a basement. The top layer is real wood, so it looks and feels like a hardwood floor.
Where engineered hardwood works best
- Rooms on a concrete slab: it can be glued or floated directly over concrete, with a moisture barrier where needed.
- Basements: it is the go-to real-wood option below grade in Metro Atlanta.
- Main floors where you want real wood: it usually installs faster and costs a bit less than solid hardwood.
Need fully waterproof? LVP is the better fit for kitchens and laundry rooms. Want a floor you can refinish many times? Look at solid hardwood.
Three ways we install it
| Method | How it works | Best for |
|---|---|---|
| Floating | Click-lock boards laid over an underlayment | Usually the fastest and most economical |
| Glue-down | Boards glued to the subfloor | A solid feel over concrete |
| Nail-down or staple | Fastened to a wood subfloor | Wood subfloors |
We recommend the method that fits your subfloor and the product you choose. Over concrete, basements and crawl spaces, we lay a vapor barrier first.
How a job runs
- Check the subfloorAt the consultation we check the subfloor type, flatness and moisture, and pick the install method.
- Remove the old floorWe pull up and haul away the existing flooring.
- PrepWe level only the areas that need it and lay a vapor barrier over concrete.
- Install and trim outWe float, glue or nail the boards, leave the expansion gap at the edges, and cover it with quarter round or reinstalled baseboards.
- Clean up and walk throughWe clean up, haul away job debris, and walk the finished floor with you.
Timeline
A typical 1,000 to 1,500 square foot engineered hardwood project takes about 2 to 3 days, depending on the install method, removal and subfloor work.
Can it be refinished?
It depends on the wear layer. Engineered hardwood with a thick veneer, 3mm or more, can usually be sanded and refinished once or twice. A thin wear layer can only be lightly buffed and recoated. If refinishing the floor many times over its life matters most, solid hardwood is the better choice.
Caring for engineered hardwood
Dust-mop regularly and clean with a wood-floor cleaner, never water, vinegar or a steam mop. Use felt pads under furniture, add rugs in high-traffic areas, wipe spills promptly, and keep indoor humidity steady to limit seasonal movement.
Choosing your product
You choose your material and style at the in-home consultation, and our estimating software produces a fully itemized price during the visit. Not sure where to start? The Genius Advisor flooring match tool recommends a starting product in a few questions.
Frequently asked questions
What is the difference between engineered and solid hardwood?
Engineered hardwood is a real-wood veneer bonded over a stable plywood or HDF core, so it resists humidity and can be installed over a concrete slab or in a basement. Solid hardwood is a single piece of wood that must be nailed to a wood subfloor. Engineered typically installs faster and costs a bit less, while solid can be refinished more times over its life.
Can engineered hardwood go over concrete or in a basement?
Yes. Engineered hardwood can be glued or floated directly over a concrete slab, with a moisture barrier where needed, which makes it the go-to real-wood option for basements and slab-on-grade rooms in Metro Atlanta.
How is engineered hardwood installed?
Three ways: floated over an underlayment with click-lock boards, glued down to the subfloor, or nailed or stapled over a wood subfloor. Floating is usually the fastest and most economical, and glue-down gives a solid feel over concrete.
How long does engineered hardwood installation take?
A typical 1,000 to 1,500 square foot engineered hardwood project takes about 2 to 3 days, depending on the install method, removal and subfloor work.
Can engineered hardwood be refinished?
It depends on the wear layer. Floors with a thick veneer of 3mm or more can usually be sanded and refinished once or twice, while thin wear layers can only be lightly buffed and recoated.
Do I need a vapor barrier under engineered hardwood?
A vapor barrier is needed any time we install over concrete, in basements and slab-on-grade rooms, and over crawl spaces, because concrete wicks moisture that can damage flooring. Over a dry wood subfloor on an upper level it is usually not required.
More answers on scheduling, prep and payment are in the flooring and gutter FAQ.
Pricing
About $7–$14 per sq ft installed
2026 Metro Atlanta range for the floor installed. Your exact number depends on the product you choose, what has to come out, and the condition of the subfloor. Old-floor removal, subfloor leveling, furniture moving, stairs and new trim are separate lines on your estimate, only if your home needs them.
For line-by-line pricing, removal costs and sample project totals, see our engineered hardwood cost guide.
Get your exact engineered hardwood price
We measure, check the subfloor, and hand you an itemized price during the visit.
Book an In-Home Consultation Call (470) 223-2206



