Our sand and refinish work


The same room twice: sanded down to bare wood (left), then with fresh finish coats applied (right).
Why homeowners choose IQ Installs
Our estimating software produces a fully itemized price during the in-home consultation, so you see every line before you decide.
We check the subfloor before we quote and level only the areas that need it, instead of charging for the whole floor.
Installed by IQ vetted and trained crews, with job-site clean-up, debris haul-away and a final walkthrough with you.
Every installation is backed by our 3-year workmanship guarantee. IQ Installs is licensed and insured.
IQ Installs sands and refinishes hardwood floors across north Metro Atlanta. We sand off the old finish and apply fresh stain and sealer to the wood you already have, so there is no new flooring to buy. A typical project is sanded and coated over 2 to 4 days, and you can walk on the floor in socks after about 24 hours.
Can your floor be refinished?
- Solid hardwood: almost always, often several times over its life, unless it has been sanded so many times that the wood above the tongue-and-groove is too thin.
- Engineered hardwood: depends on the wear layer. A thick veneer, 3mm or more, can usually take one or two sandings. A thin one can only be buffed and recoated.
- Laminate and LVP: no. They look like wood but cannot be sanded.
The surest way to know is to have us check the board thickness and condition at the in-home consultation. Replacement only makes sense when the boards are too thin to sand again, badly damaged, or you want a different floor. Then look at solid hardwood or engineered hardwood.
What a refinish includes

- InspectWe check board thickness, damage, gouges, pet stains and any old adhesive or paint that needs to come out.
- SandWe sand off the old finish down to clean wood. Dustless sanding is available.
- RepairWe repair or lace in damaged or missing boards where needed.
- StainKeep your existing color with a clear finish, or change the stain color.
- FinishWe apply the finish coats, oil-based or water-based, then clean up and walk the floor with you.
Options that change the job
- Stain color change: adds a full staining step and dry time between coats. Going from a dark stain to a much lighter one can need extra sanding.
- Dustless refinishing: sanders connect to commercial vacuum containment, so the vast majority of dust is captured at the source instead of settling through your home.
- Oil-based finish: a warm amber tone that deepens with age and needs fewer coats, but stronger fumes and a longer cure.
- Water-based finish: dries clear, keeps light, natural and gray tones true, low odor, and cures much faster.
- Board repairs: we can special-order matching material for older narrow-strip floors, like 1.25-inch boards, for a flat additional charge.
Timeline and getting your rooms back
A typical project is sanded and coated over 2 to 4 days. You can usually stay in your home: we work room by room, but the finish fumes and the need to keep the floor clear mean some rooms are off-limits for a day or two, and we plan that with you in advance.
| After the last coat | What you can do |
|---|---|
| About 24 hours | Light foot traffic in socks |
| A few days | Move furniture back, with felt pads |
| About 2 to 4 weeks | Lay rugs, once the finish fully cures |
Water-based finishes cure faster than oil-based. We give you the exact timing for the finish you choose.

Keeping the new finish looking new
Dust-mop regularly and clean with a wood-floor cleaner, never water, vinegar or a steam mop. Use felt pads under furniture, add rugs in high-traffic areas once the finish has cured, wipe spills promptly, and keep indoor humidity steady.
Choosing your product
You choose your material and style at the in-home consultation, and our estimating software produces a fully itemized price during the visit. Not sure where to start? The Genius Advisor flooring match tool recommends a starting product in a few questions.
Frequently asked questions
Should I refinish or replace my hardwood floors?
If the boards are sound and thick enough to sand, refinishing is far cheaper than replacement and makes floors look new. Replacement makes sense when the boards are too thin to sand again, badly damaged, or you want a different floor.
How do I know if my hardwood can be refinished?
Solid hardwood can almost always be sanded and refinished unless it has been sanded so many times that the wood above the tongue-and-groove is too thin. Engineered hardwood depends on its wear layer, and laminate and LVP cannot be sanded. We check board thickness and condition at the in-home consultation.
How long does refinishing take, and when can we use the floor?
A typical project is sanded and coated over 2 to 4 days. You can usually walk on the floor in socks within about 24 hours, move furniture back after a few days, and place rugs after about 2 to 4 weeks once the finish fully cures.
Can we stay home during refinishing?
In most cases, yes. We work room by room, but the finish fumes and the need to keep the floor clear mean some rooms are off-limits for a day or two, and we plan that with you in advance.
What is dustless refinishing?
Dustless refinishing uses sanders connected to commercial vacuum containment, so the vast majority of dust is captured at the source instead of settling through your home.
Oil-based or water-based finish?
Oil-based finishes add a warm amber tone that deepens with age and need fewer coats, but have stronger fumes and take longer to cure. Water-based finishes dry clear, have low odor and cure much faster. We usually recommend water-based for light or white-oak looks and oil-based for a classic warm look.
Can I change the stain color?
Yes. A color change adds a full staining step and dry time between coats. Going from a dark stain to a much lighter one can require extra sanding, which we flag in the estimate.
More answers on scheduling, prep and payment are in the flooring and gutter FAQ.
Pricing
About $3–$8 per sq ft
2026 Metro Atlanta range for the floor installed. Your exact number depends on the product you choose, what has to come out, and the condition of the subfloor. Old-floor removal, subfloor leveling, furniture moving, stairs and new trim are separate lines on your estimate, only if your home needs them.
For line-by-line pricing, removal costs and sample project totals, see our hardwood refinishing cost guide.
Get your exact sand and refinish price
We measure, check the subfloor, and hand you an itemized price during the visit.
Book an In-Home Consultation Call (470) 223-2206



